Soozier A90-249V80, Assembly Instruction Manual

Page: 7 / 16

4 ELECTRONIC CONTROL INSTRUCTIONS
5.1 Window display:
4.1.1 "SPEED" :
The current speed value is displayed in the running state, and the speed display range is 1.0-12KM /
H.
During the countdown, "3", "2", and "1" are displayed.
4.1.2 "TIME"
Displays exercise time. The display will count from 0:00 to a maximum of 99:59. Once the counter
reaches the selected time, the display will countdown to 0:00 from the set time, when the countdown
reaches 0:00, the treadmill will decrease speed slowly and come to a stop. Once the treadmill stops
completely, it will enter standby mode.
4.1.3 "DIS."
Displays the movement distance. The forward count will be from 0.0 - 99.9, and it will be re-
counted after overflow. The reverse count will decrease from the set value to zero. When the
countdown reaches 0, the treadmill will stop running at a steady speed and stop, and then enter
the standby state after completely stopping.
4.1.4 "CAL.":
Displays calories burnt value from 000-990 when counting forward, and recount after overflow,
count down from set value to 0 when counting backward, when the treadmill is down smoothly
when counting down to 0. "PULSE" heart rate window:
4.1.5
“PULSE”
When a heart rate signal is detected, the heart-shaped marker flashes, and the pulse value is
displayed. When the treadmill is powered on, there is a heart rate display within 5 seconds of
holding the heartbeat. The initial value is the actual measurement
.
4.2 Key functions:
4.2.1 " PROG " is the program selection key: In standby mode, press this key first to select the built-in
programs "P01-P02 -...- P12" in sequence-> Body fat test mode-> Manual mode->-.
4.2.2 " MODE " is the mode selection key: Press this key to cycle through "15:00", "1.0", "50.0"
("15:00" is the time countdown mode, and "1.0" is the distance countdown mode, "50.0" is the
calorie countdown mode.) When selecting various modes, you can use the setting plus and
minus keys to set the relevant countdown value after completion, press the "START" key to
start the treadmill.
5