9
Cassette Player
Listening to a tape
1
Press
(OPEN)
and insert a cassette.
Playback starts automatically.
2
Close the front panel.
If a cassette is already inserted, press
(SOURCE)
repeatedly until “FORWARD” or “REVERSE”
appears to start playback.
FORWARD
: The side facing up is played.
REVERSE
: The side facing down is played.
Note
The AMS function may not work when:
– the blanks between tracks are shorter than 4
seconds.
– there is noise between tracks.
– there are long sections of low volume or quiet
sections.
Playing a tape in various
modes
You can play the tape in various modes:
• REP (Repeat Play) the current track.
• BL.SKP (Blank Skip) skips blanks longer than
8 seconds.
• ATA (Automatic Tuner Activation) turns on the
tuner automatically when fast-winding the tape.
• METAL (Metal) lets you play a metal or CrO
2
tape.
1
During tape playback, press
(MENU)
.
2
Press either side of
(DISC/PRESET)
repeatedly until the desired mode
appears.
3
Press (+) side of
(SEEK)
to select
“ON.”
Example: ATA mode
Play mode starts.
4
Press
(ENTER)
.
To return to normal playback mode, select
“OFF” in step 3.
Playing tracks repeatedly
— Repeat Play
During playback, press
(1)
on the
card remote commander repeatedly
until “REP-ON” in the display appears.
To return to normal playback mode, select “REP-
OFF.”
Tip
During repeat playback, press
(MODE)
. “REP”
disappears from the display and repeat mode is
cancelled.
To
Press
Change the tape’s
playback direction
(MODE)
(
o
)
Stop playback
(OFF)
Eject the cassette
(OPEN)
then
Z
Skip tracks
– Automatic
Music Sensor
(SEEK)
(
.
/
>
)
[once for each track]
Fast-forward/
reverse
– Manual Search
(SEEK)
(
m
/
M
)
[hold to desired point]
Summary of Contents for XR-CA630X
Page 31: ......