15
GB
Adjusting the sound
characteristics
You can adjust the bass, treble, balance, and
fader.
You can store the bass and treble levels
independently for each source.
1
Select the item you want to adjust by
pressing
(SOUND)
repeatedly.
Each time you press
(SOUND)
, the item
changes as follows:
VOL (volume)
t
BAS (bass)
t
TRE (treble)
t
BAL (left-right)
t
FAD (front-rear)
2
Adjust the selected item by pressing
either side of
(SEEK/AMS)
.
When adjusting with the rotary
commander, press
(SOUND)
and rotate the
VOL control.
Note
Adjust within three seconds after selecting the
item.
Attenuating the sound
Press
(ATT)
on the rotary commander or
card remote commander.
“ATT-ON” flashes momentarily.
To restore the previous volume level, press
(ATT)
again.
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes
in (Telephone ATT function).
Changing the sound and
display settings
The following items can be set:
• CLOCK (page 8).
• BEEP – to turn the beep sound on or off.
• RM (Rotary Commander) – to change the
operative direction of the rotary commander.
— Select “NORM” to use the rotary
commander as the factory-set position.
— Select “REV” when you mount the rotary
commander on the right side of the
steering column.
• D.INFO (Dual Information)
*
1
– to display the
clock and the play mode simultaneously
(ON), or to display the information
alternately (OFF).
• M.DSPL (Motion Display) – to turn the
motion display on or off.
• A.SCRL (Auto Scroll)
*
2
(page 17).
1
Press
(MENU)
.
2
Press either side of
(PRST/DISC)
repeatedly until the desired item
appears.
Each time you press (–) side of
(PRST/DISC)
, the item changes as follows:
CLOCK
t
BEEP
t
RM
t
D.INFO
*
1
t
M.DSPL
t
A.SCRL
*
2
*
1
When the radio is off, or when no tape, CD,
or MD is playing, this item will not appear.
*
2
When no CD or MD is playing, this item will
not appear.
Note
The displayed item will differ depending on the
source.
Tip
You can easily switch among categories (“SET,”
“DIS,” “P/M”and “EDT”) by pressing an holding
either side of
(PRST/DISC)
for two seconds.
3
Press (+) side of
(SEEK/AMS)
to select the
desired setting (Example: ON or OFF).
4
Press
(ENTER)
.
After the mode setting is complete, the
display returns to normal playback mode.
Summary of Contents for XR-C5500
Page 23: ...23 ...
