background image

3

Notes on Cassettes

Cassette care

• Do not touch the tape surface of a cassette, as

any dirt or dust will contaminate the heads.

• Keep cassettes away from equipment with

built-in magnets such as speakers and
amplifiers, as erasure or distortion on the
recorded tape could occur.

• Do not expose cassettes to direct sunlight,

extremely cold temperatures, or moisture.

• Slack in the tape may cause the tape to be

caught in the machine. Before you insert the
tape, use a pencil or similar object to turn the
reel and take up any slack.

• Distorted cassettes and loose labels can cause

problems when inserting or ejecting tapes.
Remove or replace loose labels.

• The sound may become distorted while

playing the cassette. The cassette player head
should be cleaned after each 50 hours of use.

Cassettes longer than 90 minutes

The use of cassettes longer than 90 minutes is
not recommended except for long continuous
play. The tape used for these cassettes is very
thin and tends to stretch easily. Frequent
playing and stopping of these tapes may cause
them to become entangled in the cassette deck
mechanism.

Slack

Precautions

•If your car was parked in direct sunlight

resulting in a considerable rise in
temperature inside the car, allow the unit to
cool off before operating it.

•If no power is being supplied to the unit,

check the connections first. If everything is in
order, check the fuse.

•If no sound comes from the speakers of a

two-speaker system, set the fader control to
the center position.

•When a tape is played back for a long period,

the cassette may become warm because of
the built-in power amplifier. However, this is
not a sign of malfunction.

If you have any questions or problems
concerning your unit that are not covered in
this manual, please consult your nearest Sony
dealer.

To maintain high quality sound

If you have drink holders near your audio
equipment, be careful not to splash juice or
other soft drinks onto the car audio. Sugary
residues on this unit or cassette tapes may
contaminate the playback heads, reduce the
sound quality, or prevent sound reproduction
altogether.
Cassette cleaning kits cannot remove sugar
from the tape heads.

Summary of Contents for XR-C5300X

























Reviews: