12
Receiving the memorized
stations
1
Press
(SOURCE)
repeatedly to select the
tuner.
2
Press
(MODE)
repeatedly to select the
band.
3
Press the number button (
(1)
to
(6)
) on
which the desired station is stored.
Tip
Press either side of
(PRST/DISC)
to receive the
stations in the order they are stored in the
memory (Preset Search Function).
If you cannot tune in a preset
station
Press either side of
(SEEK/AMS)
to search
for the station (automatic tuning).
Scanning stops when the unit receives a
station. Press either side of
(SEEK/AMS)
repeatedly until the desired station is
received.
Note
If the automatic tuning stops too frequently, press
(MENU)
, then press either side of
(PRST/DISC)
repeatedly until “LOCAL” (local seek mode) is
displayed. Then press (+) side of
(SEEK/AMS)
to
select “LOCAL-ON.” Press
(ENTER)
.
During local reception and station selection,
“L.SEEK” appears in the display.
Only the stations with relatively strong signals will
be tuned in.
Tip
If you know the frequency of the station you want
to listen to, press and hold either side of
(SEEK/AMS)
until the desired frequency appears
(manual tuning).
If FM stereo reception is poor
— Monaural Mode
1
During radio reception, press
(MENU)
,
then press either side of
(PRST/DISC)
repeatedly until “MONO” appears.
2
Press (+) side of
(SEEK/AMS)
until
“MONO-ON“ appears.
The sound improves, but becomes
monaural (“ST” disappears).
3
Press
(ENTER)
.
To return to normal mode, select
“MONO-OFF” in step 2.
If FM stereo broadcast becomes
monaural
If interference occurs, the “IF AUTO” function
of this unit will automatically avoid noise and
narrow the reception frequency. In such cases,
some FM stereo broadcasts may become
monaural. If you would like to listen to such
broadcasts in stereo, manually switch to the
“WIDE” setting.
1
During radio reception, press
(MENU)
,
then press either side of
(PRST/DISC)
repeatedly until “IF AUTO” appears.
2
Press (+) side of
(SEEK/AMS)
until
“WIDE“ appears.
3
Press
(ENTER)
.
Note
When you widen the frequency signal reception
setting (“WIDE“ mode), some interference may
occur.
In the Motion Display mode, all the items are
scrolled in the display one by one in order.
Tip
The Motion Display mode can be turned off. (See
“Changing the sound and display settings” on
page 15.)
