Sony XR-C440RDS, Operating Instructions Manual

Page: 13 / 100

13
EN
Changing the operative direction
The operative direction of controls is factory
preset as in the illustration below.
If you need to mount the rotary remote on the
right side of the steering column, you can
reverse the controls operative direction.
Press (SEL) for two seconds while
pushing in the VOL control.
Adjusting the sound
characteristics
1
Select the item you want to adjust by
pressing
(SEL) repeatedly.
VOL (volume) n BAS (bass) n TRE
(treble) n BAL (balance) n FAD (fader)
2
Adjust the selected item by pressing
either
(+) or (–) .
Adjust within three seconds after selecting.
(After three seconds the button will again
serve as the volume control button.)
Muting the sound
Press (MUTE) .
The “MUTE” indication flashes.
To restore the previous volume level, press
again.
To increase
To decrease
Other Functions
Changing the sound and
beep tone
Boosting the bass sound — D-bass
You can enjoy clear and powerful bass sound.
The D-bass function boosts the low frequency
signal with a sharper curve than conventional
bass boost.
You can hear the bass line more clearly even if
the vocal sound is the same volume. You can
emphasize and adjust the bass sound easily
with the D-BASS control. This effect is similar
to the one you get when you use an optional
subwoofer system.
Moreover, the Digital D-bass
*
function creates
even sharper and more powerful bass sound
than Analog D-bass.
Adjusting the bass curve
Turn the D-BASS control to adjust the
bass level (1, 2 or 3).
“D-BASS”
*
appears in the display.
To cancel, turn the control to the OFF position.
*
If the CD changer has the digital D-bass function,
“DIGITAL D-BASS” appears on the display during CD
playback.
0dB
D-BASS 3
D-BASS 2
D-BASS 1
0dB
D-BASS 3
D-BASS 2
D-BASS 1
Digital D-bass Analog D-bass
Level
Level
Frequency (Hz) Frequency (Hz)