Sony XR-C440RDS, Operating Instructions Manual

Page: 12 / 100

12
EN
OFF
Other Functions
Using the rotary remote
The rotary remote works by pressing buttons
and/or rotating controls.
You can control the optional CD/MD changer
by the rotary remote.
By pressing buttons (the SOURCE
and the MODE buttons)
Every time you press (SOURCE) , the
source changes as follows:
TAPE n TUNER n CD/MD
Pressing (MODE) changes the operation in the
following ways:
• the tape transport.
• the band, FM1
n FM2 n FM3 n MW n LW.
• the CD/MD changer.
Tip
You can turn on this unit by pressing (SOURCE) on the
rotary remote.
By rotating the control (the SEEK/
AMS control)
Rotate the control momentarily and
release it to:
•Locate the beginnings of the tracks on the
tape. Rotate and hold the control, and
release it to fast-wind the tape. To
playback, rotate and hold the control
again, and release it.
•Locate a specific track on a disc. Rotate
and hold the control to locate the specific
point in a track, then release it to start
playback.
•Tune in the stations automatically. Rotate
and hold the control to tune in the specific
station.
By rotating the control while
pushing in (the PRESET/DISC
control)
Push in and rotate the control to:
•Receive the stations memorized on the
preset buttons.
•Change the disc.
Other operations
Press (OFF) to
turn off the unit.
Rotate the VOL control
to adjust the volume.
Press (MUTE) to
mute the sound.
XR-C540RDS:
Press
(FILE) for two seconds
to change the Disc memo.
XR-C440RDS:
Press
(DSPL) to change the
displayed items.
Press (SEL)
to adjust
and select.
(SOURCE)
(MODE)