SERVICE MANUAL
Sony Corporation
Published by Sony Techno Create Corporation
XDP-PK1000
XA-C100IP/XDP-MU100
SPECIFICATIONS
DIGITAL LINK SOUND SYSTEM
9-893-244-01
2011G33-1
©
2011.07
US Model
• XDP-PK1000 are composed of following models.
XDP-PK1000
DSP master unit
XDP-MU100
Cradle
XA-C100IP
Ampli
fi
er
XM-PK100D
Subwoofer
XS-PK120LC
Note:
Please refer to service manual separately issued for XM-PK100D
and XS-PK120LC.
DSP Master Unit (XDP-MU100)
AUDIO POWER SPECIFICATIONS
CEA2006 Standard
Power Output: 17 Watts RMS 4 at
4 Ohms < 1% THD+N
SN Ratio: 80 dBA
(reference: 1 Watt into 4 Ohms)
Power-AMP
Output:
Speaker outputs 4 CH
(Front L/R, Rear L/R)
Speaker impedance:
4 Ω – 8 Ω
Maximum power output:
45 W × 4 (at 4 Ω)
General
Outputs:
Audio output terminals: (Front/Rear)
Subwoofer output terminal (mono)
Power amplifier control terminal
Inputs:
iPod signal input terminal (dock connector)
Hi-level input terminal
Sound controls:
Bass/Treble ±7 dB
Fader/Balance ±7 steps
SUB-W /- 6Step , No sound
Power requirements:
12 V DC car battery
(negative ground (earth))
Dimensions:
(Mounting dimensions)
Approx. 210.6 mm × 40 mm × 156.6 mm
(8
3
/
8
in × 1
5
/
8
in × 6
1
/
4
in) (w/h/d)
Mass:
Approx. 0.92 kg (2 lb 1 oz)
Supplied accessories:
Card remote commander: RM-X251
Parts for installation and connections (1set)
Cradle (XA-C100IP)
Dimensions:
Approx. 65 mm × 138.8* mm × 105.3 mm
(2
5
/
8
in × 5
1
/
2
in × 4
1
/
4
in) (w/h/d)
Mass:
Approx. 0.14 kg (5 oz)
* Arm fully extended: 147.1 mm (5
7
/
8
in
) (h)
Design and specifications are subject to change
without notice.
Photo: XA-C100IP
Photo: XDP-MU100
NOTES ON CHIP COMPONENT REPLACEMENT
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
iPhone
®
, iPod
®
, iPod classic
®
,
iPod nano
®
, and iPod touch
®
are
trademarks of Apple Inc., registered in the
U.S. and other countries.
