Sony XDCAM PDW-HR1, Operation Manual, Page: 146 / 214

146
Setup Menu
C
h
ap
te
r 8
M
enu
s
To change the settings of menu items
Proceed as follows to change the settings of menu items.
1
Use the PUSH SET knob to select the required item.
Example: Screen display when item 005 DISPLAY
INFORMATION SELECT is selected
2
Press the PUSH SET knob or the SELECT function
button (F2).
This displays the setting screen 2 for the menu item
selected in step
1 .
Example: Setting screen display when item 005
DISPLAY INFORMATION SELECT is selected
3
Use the PUSH SET knob or the +/– function button
(F3 or F4) to change the setting.
4
To change other settings, press the PUSH SET knob or
the SELECT function button (F2) to return to the
previous screen, then repeat steps
1
to
3.
5
When you have completed the settings, press the
SAVE function button (F5).
The message “NOW SAVING...” appears on the video
monitor display, and “Saving...” appears in the time
data display area, while the new settings are saved in
memory. When the saving operation is completed, the
video monitor display and the time data display area
return to their normal indications.
• If you power off the unit before a save operation is
completed, settings may be lost. Wait until the save is
completed before powering off the unit.
• If, instead of pressing the SAVE function button (F5),
you press the MENU button, the new settings are not
saved. The message “ABORT !” appears on the video
monitor display and “Abort !” in the time data display
area for about 0.5 seconds, and the system exits the
menus. To change more than one setting, be sure to press
the SAVE function button (F5) after making the settings.
To return menu settings to their factory
default settings
After changing menu settings, use the following procedure
to return the settings to their factory default settings
(setting initialization).
To return all settings to their factory default
settings
1
Press the MENU button to display the setup menu.
2
Press the RESET button.
A message appears, to confirm whether you wish to
return all settings to their factory default settings.
3
Press the SAVE function button (F5).
The message “NOW SAVING...” appears on the video
monitor display, and “Saving...” appears in the time
data display area, while the settings of all items are
returned to their factory default settings. These factory
default settings are saved in memory.
Function buttons
F1 to F6
(The function to
be displayed
varies depending
on the situations.) RETURN: Goes up one level.
SELECT: Selects an item.
UP: Skips back 100 or 50 items in the
list of menu items.
DOWN: Skips forward 100 or 50 items
in the list of menu items.
SAVE: Saves a new setting to memory.
EXIT: Exits the current menu.
–: Changes a setting.
+: Changes a setting.
RESET button • Returns the current setting to the
factory default.
• Answers “No” to a question.
Menu control
buttons Functions
0 O 1 : P - R O L L T I M E - 5 s
K E Y P A R A M E T E R
0 0 2 : C H A R A H - P O S - 0 A
0 0 3 : C H A R A V - P O S - 2 E
* 0 0 5 : D I S P L A Y S E L - T & C N T
0 0 6 : L O C A L E N A - s t & e j
0 0 7 : D I S C T I M E R - + - 1 2 H
0 0 9 : C H A R A T Y P E - w h i t e
0 1 1 : C H A R A S I Z E - x 1
0 1 2 : C O N D D I S P L Y - d i s
0 1 3 : S Y S T E M F R E Q - o f f
0 1 6 : A L A R M - o n
Current setting
I T E M - 0 0 5
D I S P L A Y I N F O R M A T I O N
S E L E C T
t i m e d a t a & C N T
Current setting
Notes
Message on the video
monitor display Initialize all items to factory
preset values?
Message in the time data
display area Init setup?