Sony XDCAM PDW-D1, Operation Manual

Page: 122 / 138

122 5-2 Names and Functions of Parts
Chap
te
r 5
U
s
in
g t
h
e
Ut
ilit
y S
o
ftw
a
re
the + sign changes to a – sign. (Click the –
sign to close the submenu display.)
Click a menu item to display the operating
screen for the menu item in the operating
section.
• Device information menu
Basic information: Shows product
information, system information,
and disc information
(see page
123) .
Hours Meter: Shows the cumulative
number of operating hours of this
unit
(see page 124) .
Version: Shows the firmware version
information (see page 124) .
Alarm log: Shows the alarms generated
by this unit (see page 124) .
• Setup menu
AV settings: Shows a window for setting
the operation of this unit, time code,
audio control, recording format, and
line mode
(see page 124) .
Owner setting: Shows a window for
setting UMID owner information
(see page 128) .
Clip title settings: Shows a window for
assigning titles to clips
1)
and for
enabling or disabling use of user-
defined clip and clip list file
names
2)
(see page 129) .
Battery mode setting: Shows a window
for setting the alarm of remaining
capacity of the battery pack in this
unit
(see page 130) .
Save/recall setup: Shows a window for
saving or recalling the AV, owner,
and battery mode settings
(see page
131) .
Date/time setting: Shows a window for
setting the date, time, and time zone
(see page 131) .
• Disc operation menu
Format: Shows a window for formatting
a disc (see page 131) .
Delete clip: Shows a window for deleting
a clip or clips recorded on the disc
(see page 132) .
1) This is supported from firmware version 1.4
and utility software version 1.10.
2) This is supported from firmware version 1.5
and utility software version 1.50.
c
Operating section
Shows the operating window for the
function selected in the tree display.
Click the ? button to show help information
on the display (Windows only).
PC operation settings dialog
box (Windows only)
In the menu bar, select Settings > PC
operation settings, to open the PC operation
settings dialog box.
In this dialog box, set the following items.
• Language used for the user interface of
the utility software
• Enable/disable FAM connection
To set the language used
1
From the Language list, select the
desired language, and click the Set
button.
2
Exit the utility software, and restart it
(see page 119) .
The language you selected in step 1 is
now reflected in the utility software
displays.
To enable or disable the FAM
connection
1
In the FAM operation section, select
either of the following for login, and
click the Set button.
• Permit: Enable the FAM connection.
(Select for an FAM connection.)
• Inhibit: Disable the FAM
connection. (Select for an AV/C
connection.)