manualshive.com logo in svg

Sony XCL-U100, Technical Manual

Share
Download
Sony XCL-U100 Technical Manual Download Page 3

Ov
er
v

ie

w

Features

3

Overview

The XCL-U100 is a black and white digital video 
camera module. This camera module outputs digital 
images utilizing LVDS via the DIGITAL IF (interface) 
connector.

Features

DIGITAL IF connector

Equipped with a Camera Link standard mini connector. 
The XCL-U100 can output a digital image at 15 frames 
per second.

Supports the Camera Link PoCL 
Standard

The XCL-U100 supports the PoCL (Power over Camera 
Link) standard. By connecting a PoCL-compatible 
camera link cable to a PoCL-compatible camera module 
interface board, you can power, control, and output 
images from the camera using a single cable.
This module is also provided with a DC IN connector to 
enable you to use a power adaptor and a camera module 
interface board without support for PoCL (non-PoCL) to 
operate the camera.

High image quality

The XCL-U100 has a progressive scan CCD of 
2,000,000 pixels. This module produce high-resolution 
images. By adopting square pixels, images can be 
processed using the original aspect ratio without a 
converting procedure.

Various mode settings

Sending a command from the host device allows the 
following mode settings.
• Gain
• Read mode: normal/binning
• Partial scan
• Shutter: Normal/Trigger shutter
• Shutter speed
• Gamma
• Switching an output Bit Depth
• 3 × 3 filter
• Binarization

Electronic shutter function

Shutter speed can be selected from variety of available 
speeds.

External trigger shutter function (2 to 
1/10,000 s)

You can obtain a still picture by inputting an external 
trigger. This function is useful to shoot a fast-moving 
object clearly.

Partial scan

The camera module can limit the number of the actual 
video output lines to achieve high frame rates, enabling 
high-speed image processing.

Body fixing

The screw holes to install the camera module are located 
under the front panel (the CCD reference plane). 
Installing the camera module on the front panel 
minimizes deviation of the optical axis.

Gamma

You can switch to OFF or ON.
When you switch to ON, you can select from various 
modes, and draw not only the default gamma line but 
also an original gamma curve.

Switching an Output Bit Depth

You can select 8 bit output, 10 bit output, or 12 bit 
output.

Binning

By “binning” two pixels that align vertically, you can 
acquire a frame rate twice as high as that in the normal 
mode.

3 × 3 filter

You can configure the 3 × 3 filter manually. Six different 
table presets are also available.
Outline detection detects an outline from a picture and 
outputs an image made up of the outline only.

Binarization

Outputs an binarized image. Sensitivity can be changed.

Note 

The CCD is driven at high speed during a Partial scan or 
Binning operation. In this situation, if intense light is 
input to the camera, the peripheral areas of the video 
image may be affected. In such a situation, adjust the 
amout of light using the iris.

Summary of Contents for XCL-U100













































Reviews:

No comments

Brands by name

Popular brands

Load more brands