manualshive.com logo in svg

Sony WRR-855B, Service Manual, Page: 39 / 84

Share
Download
Sony WRR-855B Service Manual Download Page 39

4-1

WRR-855B

4-1. Notes on Repair Parts

1. Safety Related Components Warning

Components marked 

!

 are critical to safe operation.

Therefore, specified parts should be used in the case of
replacement.

2. Standardization of Parts

Some repair parts supplied by Sony differ from those
used for the unit. These are because of parts common-
ality and improvement.
Parts list has the present standardized repair parts.

3. Stock of Parts

Parts marked with “o”  at SP(Supply Code) column of
the spare parts list may be not stocked. Therefore, the
delivery date will be delayed.

4. Units Representation

The following represented units are changed or
omitted in writing.

Units

Representation

Capacitance

u

F

uF

Inductance

u

H

uH

Resistance

Ω

Abbreviation

Temperature

°

C

XXX-DEG-C

5. Destination Representation

The part indicated “For U/AU” in the spare parts list is
used in the unit written below.
For U : The part is used in a unit for U.S.A.
For AU: The part is used in a unit for Australia.

Section 4

Spare Parts

Summary of Contents for WRR-855B





















































































Reviews:

No comments