28
OUTPUT
LEVEL
CH
GP
MUTING
NO.
FREQ
1
2
S
Ø
ON
ø
OFF
1
2
LEVEL
MONITOR
MIN
MAX
UHF SYNTHESIZED DIVERSITY TUNER WRR-850
POWER
RF
AF
OUTPUT
LEVEL
CH
GP
MUTING
NO.
FREQ
RF
AF
1
2
UHF synthesized
transmitter
to the input connector of a
mixer, amplifier, etc.
UHF synthesized wireless
microphone
Operation
1
Press the POWER switch.
The power is turned on.
Note
Press the POWER switch after reducing the volume of equipment
connected to the TUNER OUTPUT as noise will be heard if the power
is turned on or off beforehand.
2
Turn on the wireless microphones or transmitters.
• Before using the wireless microphones or the transmitter channels, set
the microphones to the same channels as those on the tuner.
• For details on setting the channels on the tuner and setting up the
system, see “Channel Plan” on page 5 and System Setup on pages
18~21.
• For details on channel selection, see “Selecting the Reception
Channel” on page 22.
If noise is heard
Depending on the environment where the system is installed, outside noise
or radio waves may disrupt the transmission of certain channels.
To select a channel under these circumstances, switch channels after
turning off the power to the microphone or transmitter, then select a
channel for which the RF indicator is off (i.e., a channel free from noise or
radio wave interference). Then set the microphone and transmitter to the
same channel.