24
5
While holding down the CH button, press the plus (+) or minus (–)
button to select a channel.
Similar to step 3 above, pressing the plus (+) button scrolls through the
groups in the order shown in the group and reception channel list (See
“Groups, Channels and Frequencies” on page 5). Pressing the minus
(–) button scrolls through the groups in reverse order. If the last channel
of a group is displayed and you press the plus (+) button, the first
channel of the group is displayed. If the first channel of a group is
displayed and you press the minus (–) button, the last channel of the
group is displayed.
When the GP indicator reads “00”, channels are cycled one at a time.
Settings
A2 6911
A2 6922
GP
CH
GP
CH
+
–
Selecting the reception channel by frequency
Press the plus (+) button. This changes the CH indicator to a frequency
indicator and lets you select a reception channel by frequency.
While holding down the CH button, press the plus (+) button to show a
higher frequency, or press the minus (–) button to show a lower
frequency.
Press the plus (+) button again (or the GP button) to change the
frequency indicator back into a channel indicator.
MHz
MHz
801.375
802.750
GP
CH
GP
CH
+
–
6
If the desired channel or frequency is displayed, release the CH button
and plus (+) or minus (–) button.
The selected channel is set.
Storing the set group, channel and muting level
The selected group and channel, and the muting level set in the following
section are stored in memory 5 seconds after appearing on the display.