10
Installation of Antenna and Down-Converter
Installation of Antenna
and Down-Converter
Be sure to connect the down-converter securely to the
antenna, or the down-converter may fall down.
Be sure NOT to directly connect the down-converter to a
large antenna. If you do so, the connector may be
damaged.
Using the mounting bracket
Normally, directly attach the antenna to the down-
converter, and fix them to a pole using the supplied
mounting bracket.
1
Attach the antenna to the down-converter.
2
Fix the down-converter to the bracket using the
supplied four M4
×
6 and two M3
×
6 screws.
When required, secure the cable using the supplied
fasten belt.
3
Fix the bracket to a pole (20 to 36 mm dia. ).
Mounting to a tripod
You can install the antenna and down-converter by
mounting them to a tripod using the tripod screw hole of
the down-converter.
Note
Attach the anntena in the direction so that the UP arrows
on the rear point upwards.
Caution
Antenna
Down-converter
Holes for mounting
N connectors
Holes for mounting
M4
M3
Fasten belt
Bracket
Cable
Pole