1-9 (E)
WLL-CA50
12. Remove the five screws, and remove the PS-645 board
from the heat sink (PS).
13. Unsolder the transmitter from the PS-645 board.
14. Remove the cool sheet PS from the transmitter.
15. Reassemble the PS-645 board and transmitter in the
reverse order of removal.
n
When connecting the coaxial cable, hold the plug and
connect the coaxial cable to the connector vertically.
Press the plug into the connector by small turning to
the left and the right.
Connecting connector
Hold the plug to connect
Heat sink (PS)
Cool sheet (PS)
PS-645 board
Transmitter
Unsolder
Unsolder
PSW3
x
6
PSW3
x
6
P2.6
x
6
P2.6
x
6
40-Pin bracket
Sheet (40P)
Camber
Stepped
screws
40-pin connector
40 spots
Harness
(CAMERA)
1-9. Removing/Reinstalling the 40-pin
Connector
1.
Remove the two stepped screws, and remove the sheet
(40P).
2.
Remove the six screws and remove the 40-pin bracket.
3.
Unsolder the harness (CAMERA), and remove the 40-
pin connector.
