Wireless Noise Canceling Stereo Headset
WH-1000XM3
Using the supplied headphone cable
If you use the headset at a place where it is restricted to use Bluetooth devices such as on an airplane, you can use the
headset as noise canceling headphones by connecting a device via the supplied headphone cable and turning the
headset on.
The headset supports high resolution audio playback.
Hint
You can listen to music even if the headset is turned off. In this case, the noise canceling function cannot be used.
To enjoy high resolution audio music or use the noise canceling function/Ambient Sound Mode, turn the headset on.
Use the supplied plug adapter for in-flight use to enjoy the in-flight entertainment.
The headset turns off automatically if you disconnect the supplied headphone cable from the headset while it is turned on.
When an incoming call arrives, a ring tone is heard via the headset. Answer the call using your smartphone or mobile phone, and
talk using the microphone of the phone. You can hear the caller’s voice from the headset.
If you disconnect the headphone cable from the smartphone or mobile phone, you can talk using the microphone and speaker of
the phone.
Note
Use the supplied headphone cable only.
Make sure you insert the plug firmly.
When using the headphone cable the Bluetooth function cannot be used.
You can operate the touch sensor control panel only for Quick Attention Mode. Adjust the volume, playback/pause, and other
operations on the playback device.
The NC/AMBIENT button cannot be used when the headset is powered off.
Depending on the in-flight entertainment, the plug adaptor for in-flight use may not be used.
4-740-049-11(3) Copyright 2018 Sony Corporation
Connect a playback device to the INPUT jack with the supplied headphone cable.
Be sure to connect the L-shaped plug into the connecting device.
1
74
