Wireless Noise Canceling Stereo Headset
WF-1000XM4
What is noise canceling?
The noise canceling function generates antiphase sound against outside surrounding noises (such as noises in vehicles
or noises from air conditioners indoors) to cancel out surrounding noises.
Note
The effect of noise canceling may not be pronounced in a very quiet environment, or some noise may be heard.
When you are wearing the headset, depending on how you wear the headset, the effect of noise canceling may vary or a beeping
sound (feedback) may be heard. In this case, take off the headset and put it on again.
The noise canceling function works primarily on noise in the low frequency band such as vehicles and air conditioning. Although
noise is reduced, it is not completely canceled.
When you use the headset in a car or a bus, noise may occur depending on street conditions.
Mobile phones may cause interference and noise. Should this occur, move the headset further away from the mobile phone.
Do not cover the microphones on the left and right units of the headset with your hands. If they are covered, the effect of noise
canceling function or Ambient Sound Mode may not perform properly, or a beeping sound (feedback) may occur. If any of this is
the case, remove your hands, etc. from the left and right microphones.
A:
Microphones (left, right)
Related Topic
Using the noise canceling function
5-027-983-11(1) Copyright 2021 Sony Corporation
73
