Sony WF-1000XM4 Manual Download Page 17

Page: 17 / 139

Wireless Noise Canceling Stereo Headset

WF-1000XM4

Wearing the headset

Hint

If you feel earbud tips are difficult to put into your ears, change the size of earbud tips or squeeze earbud tips lightly before
wearing the headset.

Put the headset units into both ears.

Put the headset unit with the

(left) mark into your left ear and the headset unit with the

(right) mark into your

right ear. The left unit has a tactile dot.

Be careful not to come in contact with the touch sensor when you wear the headset on your ears.

Tactile dot

Touch sensors (left, right)

Adjust the fit of the headset to your ears.

Twist the headset unit to fit it snugly into the ear canal, and adjust the positioning of the headset unit until it fits
comfortably.

Wait for about 10 seconds for the earbud tip shape to stabilize.

Summary of Contents for WF-1000XM4









































































































































Search results

Summary of Contents for WF-1000XM4

Reviews:

Related manuals for WF-1000XM4

Brands by name

Popular brands

Sony WF-1000XM4, Manual

Search results

Summary of Contents for WF-1000XM4

Reviews:

Related manuals for WF-1000XM4

Brands by name

Popular brands