30
Using “ImageDirector3” to Adjust the Picture
Quality
By using the “ImageDirector3,” you can make the desired gamma correction from a
computer connected to the unit. Connect the REMOTE or LAN connector of the unit with
a computer and start-up “ImageDirector3” on the computer.
For details on how to use “ImageDirector3,” refer to the Help in “ImageDirector3.”
• You need to install the “ImageDirector3” on a computer beforehand. “ImageDirector3” can be
downloaded from the Sony website.
http://esupport.sony.com/US/p/select-system.pl
http://www.pro.sony.eu/pro/article/projectors-home-cinema-article
• When connecting the REMOTE or LAN connector with a computer, connect while the power of
the computer and the unit is off.
• You cannot adjust the picture quality when “Gamma Correction” in the Picture
menu is set to
“Off”.
• When you set “Gamma Correction” in the Picture
menu to 1.8, 2.0, 2.1, 2.2, 2.4, or 2.6,
“ImageDirector3” displays Gamma 1, Gamma 2, Gamma 3, Gamma 4, Gamma 5, or Gamma 6,
respectively.
• If you use “ImageDirector3” while a 3D video image is displayed or a 3D signal is input, the image
may be distorted.
Notes
Summary of Contents for VPLGT100
Page 86: ...Sony Corporation ...
