1-33
VPL-GH10
(7) Finishing the Update
Fig.13 Firmware Updater - Complete screen
When Network is upgraded
When the upgrade is completed, click [Restart]. The Network block terminates Flash Write Mode and is
rebooted to return to the normal operating condition. When finishing the upgrade without continuing, exit
Firmware Updater by clicking [Finish].
When Sub or Scaler is upgraded
Every time the upgrade for Sub or Scaler is completed, exit Firmware Updater by clicking [Finish], and
then unplug the AC power of the projector and plug it again.
When performing the upgrade consecutively, return to Step 1-8-3.(1) and perform the upgrade.
n
When a PC with Firewall installed is used
The upgrade may take time due to the block caused by the Firewall function.
In this case, temporarily disable the Firewall function.
*
When performing the upgrade on a PC in which Windows XP SP2 is installed, the upgrade time may be shortened by temporarily
setting “Windows Firewall” to [Unblock].
