1-25
VPL-GH10
1-8. Network
1-8-1. Overview
VPL-GH10 is equipped with the Network terminal. The user can check the projector status, and can
implement the various settings such as controls of the projector and setups of the Network block by using
the Web-browser.
In addition, it has dedicated functions for repair service such as the firmware update function via network,
the Event Trace function.
The firmware update function enables the user to upgrade the firmware such as the Network (Network
block) firmware, the Sub (Sub microcomputer) firmware and the Scaler (PixelWorks) firmware.
The Event Trace function enables the user to browse the information such as the logs (Lamp Timer Reset
log, Error log) of the projector.
1-8-2. Service Preparation
(1) Connecting the Projector to the PC
To connect the projector to the PC directly, use the CAT5 cross-cable. Establish the network setups of the
projector and the PC so that the same subnet mask is set in both of the projector and the PC.
If the projector is connected to LAN, connect the PC to the same LAN and establish the Network setup of
the PC in accordance with the user’s LAN environment.
(2) Confirming the IP Address
Turn on the power of the projector, and have the Menu screen appear on the display. Confirm the IP
address of the projector on the “Installation” Menu - [Network Setting] screen.
