1-21
VPL-GH10
1-6-3. Writing 3DGamma/LookUpTable/DDC/
ABGamma/LCK/OGMTable/
CSMatrixTable Data
Use the dedicated application “Quick Access” for writing
the data.
Application name: 3DGamma Quick Access
Filename:
QuickAccess.exe
Version:
8.00 or later
1.
Connect the PC to GH10 with the RS-232C cross
cable.
2.
Turn the power on to the projector.
3.
Double-click on “QuickAccess.exe” to launch the
application.
4.
Select “VPL-GH10” from the [Model] pull-down
menu.
5.
Select “Load” from the [Load/Save] pull-down menu.
6.
Select the data type (3DGamma/LookUpTable/DDC/
ABGamma/LCK/OGMTable/CSMatrixTable) from
the [3dgm/Lut] pull-down menu.
7.
Click on [Next].
8.
Press the [Browser] button and specify the file to
write.
9.
Click on [Next].
10. Set the COM Port and switch the baud rate to 38400.
11. Click on [Next].
12. When the dialog box appears prompting your confir-
mation, click on [OK].
13. Writing has finished when “Completed.” appears.
14. Click on [End].
*
See Technical Memo DPPJ04-044R for more details.
1-6-4. How to Obtain the 3DGamma/
LookUpTable/DDC/ABGamma/LCK/
OGMTable/CSMatrixTable Data from
the Board
For reading out the captioned data, use the dedicated
application program Quick Access.
Application name: 3DGamma Quick Access
Filename:
QuickAccess.exe
Version:
8.00 or later
1.
Connect the PC to GH10 with the RS-232C cross
cable.
2.
Turn the power on to the projector.
3.
Double-click on “QuickAccess.exe” to launch the
application.
4.
Select “VPL-GH10” from the [Model] pull-down
menu.
5.
Select “Save” from the [Load/Save] pull-down menu.
6.
Select the data type (3DGamma/LookUpTable/DDC/
ABGamma/LCK/OGMTable/CSMatrixTable) from
the [3dgm/Lut] pull-down menu.
7.
Click on [Next].
8.
Click the [Browse] button to enter the filename of data
to be saved.
9.
Click on [Next].
10. Set the COM Port and switch the baud rate to 38400.
11. Click on [Next].
12. When the dialog box appears prompting your confir-
mation, click on [OK].
13. Obtaining has finished when “Completed.” appears.
14. Click on [End].
