Error Handling
US
14
The WARNING1 or WARNING2 indicator lights up or flashes if there is any trouble with your projector.
If there is any problem or an error message appears on the screen, refer to “Error Handling” in the Operating Instructions
contained in the supplied CD-ROM.
If the indicator starts flashing in a way of other than the above, or the symptom persists even after carrying out the above methods, consult with
qualified Sony personnel.
Error Handling
About Indicators
Flashing/Lighting indicators
The number of
flashes
Cause and Remedy
Three times
The light source does not light properly due to an abnormality of the light source or
light source power. Turn off, then turn on the power after a while.
If the symptom persists, consult qualified Sony personnel.
Six times
The unit detects a drop impact.
If there is abnormality on the unit, consult with qualified Sony personnel.
If there are no abnormalities on the unit, disconnect the AC power cord and check
that the LED indicator turns off, then connect the AC power cord and turn the unit
on.
Twice
The internal temperature is unusually high. Check to ensure that nothing is blocking
the ventilation holes, the air filter is not clogged, and the unit is not being used at
high altitudes.
Three times
The fan is broken. Consult with qualified Sony personnel.
Note
WARNING2
WARNING1
(Flashes in red)
(Flashes in red)
(Flashes in red)
Both indicators flash
Summary of Contents for VPL-VZ1000EZ
Page 30: ......
