Sony VPL-VW760ES, Operating Instructions Manual

Page: 39 / 54

39
Specifications
• The values for mass and dimensions are approximate.
• Not all optional accessories are available in all countries and area. Please check with your local Sony Authorized Dealer.
• Information on optional accessories in this manual is current as of November 2017.
Design and specifications of this unit and its optional accessories are subject to change without notice.
Item Description
Display System SXRD panel, projection system
Display device Size of effective
display area 0.74-inch (18.8 mm) SXRD
Number of pixels 26,542,080 pixels (8,847,360 pixels × 3)
Projection lens 2.06 times zoom lens (motorized)
f = 21.7 mm to 44.7 mm
F3.0 to F4.0
Light source Laser diode
Projection image size 60-inch to 300-inch (1,524 mm to 7,620 mm) (measured diagonally)
Accepted digital signals See “Preset Signals” (page 40).
Inputs/Outputs HDMI connectors
(HDCP 2.2) × 2
TRIGGER
connectors × 2, mini jack, DC 12 V, Max. 100 mA
REMOTE connector RS-232C: D-sub 9-pin (male)
LAN connector RJ45, 10BASE-T/100BASE-TX
IR IN connectors Minijack
USB connector Type A, DC 5 V, Max. 500 mA
Outside dimensions (w/h/d) 560 mm × 223 mm × 496 mm (22
1
/
16
inches × 8
25
/
32
inches × 19
17
/
32
inches) (without
protrusions)
Mass Approx. 20 kg (44 lb)
Power requirements AC 100 V to 240 V, 4.3 A to 1.8 A, 50/60 Hz
Power consumption 430 W
Standby mode power
consumption Standby 0.4 W (when “Remote Start” is set to “Off”)
Networked Standby 1.0 W (LAN) (when “Remote Start” is set to “On”)When a LAN terminal is not connected,
it becomes a low power consumption mode (0.5 W).
Operating temperature 5°C to 35°C (41°F to 95°F)
Operating humidity 20% to 80% (no condensation)
Storage temperature –10°C to +60°C (14°F to 140°F)
Storage humidity 20% to 80% (no condensation)
Supplied accessories See “Checking the Supplied Accessories” on the Quick Reference Manual.
Optional accessories Projector Suspension Support: PSS-H10
Active 3D Glasses: TDG-BT500A
Notes