29
Installation Menu
The Installation menu is used for changing the installation settings.
Setting items
Description
Image Flip
Flips the picture on the screen horizontally and/or vertically.
HV:
Flips the picture horizontally and vertically.
H:
Flips the picture horizontally.
V:
Flips the picture vertically.
Off:
The picture does not flip.
Use this item for installation for the rear projection or ceiling installation.
Lens Control
Avoids any operation of the lens such as “Lens Focus,” “Lens Zoom,” and “Lens Shift,” by mistake.
On:
Enables adjustment of the lens.
Off:
Prevents any adjustment of the lens.
Anamorphic Lens
Select a setting to match the anamorphic lens conversion ratio.
1.24x:
Select this when you use an anamorphic lens with a horizontal rate of 1.24×.
1.32x:
Select this when you use an anamorphic lens with a horizontal rate of 1.32×.
Trigger Select
Switches the output function of the TRIGGER 1/TRIGGER 2 connector.
Off:
Turns off the TRIGGER connector function.
Power:
Outputs 12 V signals from the TRIGGER 1/TRIGGER 2 connectors when the unit is on. The
TRIGGER 1/TRIGGER 2 connectors do not output any signals when the unit is in standby.
V Stretch:
Works with the “Aspect” setting’s “V Stretch” (page 23) and outputs a 12 V signal from the
TRIGGER 1 or TRIGGER 2 connector.
2.35:1 Zoom:
Works with the “Aspect” setting’s “2.35:1 Zoom” (page 23) and outputs a 12 V signal
from the TRIGGER 1 or TRIGGER 2 connector.
IR Receiver
Selects the remote control detectors (IR Receiver) on the front and rear of the unit.
Front & Rear:
Activates both the front and rear detectors.
Front:
Activates the front detector only.
Rear:
Activates the rear detector only.
Panel Alignment
This feature allows you to adjust the gaps in the color of characters or the picture on the screen.
Adjust:
Adjusts the gaps in the colors selecting “Adjust Item” or “Adjust Color.”
Adjust Item:
Selects how to make adjustments from below.
Shift:
Shifts the whole picture and makes adjustments.
Zone:
Selects the desired range and makes adjustments.
Adjust Color:
Assigns the desired color to adjust the gaps in color. Select “R” (Red) or “B” (Blue) to
make adjustments based on “G” (Green).
Pattern Color:
Select “R/G” (Red and Green) or “R/G/B” (White, all colors) when “Adjust Color” is
“R” (Red). Select “B/G” (Blue and Green) or “R/G/B” (White, all colors) when the “Adjust Color” is
“B” (Blue).
Adjust:
The shift adjustment and zone adjustment of the color selected in “Adjust Color” can be made
with the
<
/
,
/
M
/
m
button.
When “Shift” is selected: Assign the settings of the horizontal direction (H) with the
<
/
,
button
and the vertical direction (V) with the
M
/
m
button on the shift adjustment screen.
Summary of Contents for VPL-VW760ES
Page 54: ...Sony Corporation ...
