Sony VPL-V500Q, Operating Instructions Manual

Page: 14 / 119

14
(EN)
This section describes how to connect the projector with a computer or a
VCR and external active speakers. For details on how to connect other
equipment, see page 30.
Also refer to the instruction manuals of the equipment to be connected.
When making connections, be sure to:
• turn off all equipment before making any connections.
• use the proper cables for each connection.
• insert the plugs of the cables properly; plugs that are not fully inserted
often generate noise. When pulling out a cable, be sure to pull it out from
the plug, not the cable itself.
Connecting with a Computer or a VCR
For details on the DIP switch setting of
the adapter, see page 36.
S-Video cable (not supplied)
S VIDEO VIDEO
L
(MONO)
R L R
CONTROL S IN AUDIO IN
75
Ω
ON
OFF
VIDEO IN AUDIO IN
INPUT A
AUDIO OUT
Computer
Audio cable (not supplied) HD D-sub 15-pin cable (supplied)
Audio cable
(not supplied)
to AUDIO OUT
Active speakers to
VIDEO
OUT
to S VIDEO OUT
VCR
Video cable
(not supplied)
Front
AC power cord
(supplied)
to a wall outlet to AC IN
Use the supplied adapter when
connecting with a Macintosh
1)
computer.
1) Macintosh is a registered trademark of Apple Computer, Inc.
..........................................................................................................................................................................................................