Sony VPL-HW65 Operating Instructions Manual Download Page 49

Page: 49 / 84

Remove the filter holder.

Remove the air filter.

Attach the new air filter so that it fits
into each claws (10 positions) on the
filter holder.

Attach the air filter aligning it with the
shape of the filter holder.
Also, do not touch the fan after removing
the air filter that is set deep inside the
projector.

Attach the filter holder.

The projector will not turn on unless the
filter holder is securely closed.

Wipe dust off the ventilation holes

(intake) with a soft cloth.

Place the unit back on its original

position.

Turn on the unit, then select the lamp

setting item on the Setup

menu.

The menu screen below will be
appeared.

Tip

If “Settings Lock” is set to “Level B,” set to
“Off” once (page 32).

Select “Yes.”

Caution

Do not put your hands into the lamp
replacement slot, and do not allow any liquid
or other objects into the slot to avoid
electrical shock or fire.

• The unit will not turn on unless the lamp is

securely installed in place.

Note

Claws

Notes

Ventilation holes (intake)

Summary of Contents for VPL-HW65





















































































Search results

Summary of Contents for VPL-HW65

Reviews:

Related manuals for VPL-HW65

Brands by name

Popular brands

Sony VPL-HW65, Operating Instructions Manual

Search results

Summary of Contents for VPL-HW65

Reviews:

Related manuals for VPL-HW65

Brands by name

Popular brands