Sony VPL-FHZ700L, Service Manual

Page: 94 / 140

2-24 (E)
VPL-FHZ700L
2-6-7. Writing of NVM Data
1. Connect the power cord and set this unit to standby state.
2. Press
the
[I/O]
button on this unit.
The lamp lights and the image is displayed.
3. Double-click QuickAccess2.exe to start the application.
4. Select a target model on the Model pull-down menu.
5. Select Load on the Load/Save pull-down menu.
6. Select NVM on the Data Type pull-down menu.
7. Click
the
[Next]
button.
8. Select the serial port used for connecting PC on the Serial Port pull-down menu.
Upper line: Serial port number used for connecting PC
Lower line: 38400 (not selectable)
9. Click the
[Next]
button.
10. Select “ALL” on the Load field.
11. Check the Verify check box.
12. Click the
[Browse...]
button.
The file selection window is displayed.
12. Set the destination file for the writing data.
14. Click the
[Next]
button.
The writing starts.
After completed, The massage “Turn Off and On the AC, and then Power On to enable the new
settings.” is displayed.
15. Click the
[OK]
button.
Completed is displayed.
16. Disconnect the power cord.
17. Click the
[Complete]
button.