Sony VPL-FHZ700L, Service Manual

Page: 90 / 140

2-20 (E)
VPL-FHZ700L
2-6-3. Saving of DDC Data
1. Connect the power cord and set this unit to standby state.
2. Press
the
[I/O]
button on this unit.
The lamp lights and the image is displayed.
3. Double-click QuickAccess2.exe to start the application.
4. Select a target model on the Model pull-down menu.
5. Select Save on the Load/Save pull-down menu.
6. Select DDC on the Data Type pull-down menu.
7. Click
the
[Next]
button.
8. Click the
[Browse...]
button.
The file selection window is displayed.
9. Set the destination file for the obtained data as below.
DDC data for INPUT B: BPJ_WUXGA_Pixie_VGA_0_
**
.dat
DDC data for INPUT C: BPJ_WUXGA_Pixie_DVI_1_
**
.dat
DDC data for INPUT D: BPJ_WUXGA_Pixie_HDMI_2_
**
.dat
DDC
data for INPUT E: BPJ_WUXGA_Pixie_HDMI_3_
**
.dat
n
**
means version.
10. Click the
[Next]
button.
11. Select the serial port used for connecting PC on the Serial Port pull-down menu.
Upper line: Serial port number used for connecting PC
Lower line: 38400 (not selectable)
12. Click the
[Next]
button.
The window displaying the model name of this unit, serial number, and the file path of the destination
of the obtained data to save is displayed.
13. Click the
[OK]
button.
The saving starts. Completed is displayed after completed.
14. Disconnect the power cord.
15. Click the
[Complete]
button.