Sony VPL-FHZ700L, Service Manual

Page: 92 / 140

2-22 (E)
VPL-FHZ700L
2-6-5. Writing of B Board/Opt Unit/3Dgamma/LookUpTable/Chiral/GCFB Data
1. Connect the power cord and set this unit to standby state.
2. Press
the
[I/O]
button on this unit.
The lamp lights and the image is displayed.
3. Double-click QuickAccess2.exe to start the application.
4. Select a target model on the Model pull-down menu.
5. Select Load on the Load/Save pull-down menu.
6 Select the data type (B Board/Opt Unit/3Dgamma/LookUpTable/Chiral/GCFB) on the Data Type
pull-down menu.
7. Click the
[Next]
button.
8 Click the
[Browse...]
button.
The file selection window is displayed.
9. Select the file to be written.
10. Click the
[Next]
button.
11. Select the serial port used for connecting PC on the Serial Port pull-down menu.
Upper line: Serial port number used for connecting PC
Lower line: 38400 (not selectable)
12. Click the
[Next]
button.
The window displaying the file path, model name written in file, unit serial, serial number model
name of this unit, and serial number is displayed.
13. Click the
[OK]
button.
The writing starts. Completed is displayed after completed.
14. Press the
[I/O]
button and set this unit to standby state.
15. Disconnect the power cord.
16. Click the
[Complete]
button.