50
Remote Commander
Others
The image is dark/too bright.
The settings for “Brightness,” “Contrast,” and “Light Output Mode” affect
brightness of the image. Check if the value is appropriate (page 24).
“With Static Signal” is set to “On” (page 31).
When video signal is not input, the light is dimmed to reduce power
consumption (page 31).
When the temperature around the unit is high, the brightness may be
reduced to protect the unit.
The image is not clear.
Check if the projector is in focus (page 17).
The picture will not be clear if condensation has accumulated on the lens. In
such a case, let the projector sit for about two hours with the power on.
Noise appears on the image.
Check if the connecting cable is connected to external device properly
(page 8).
Symptom
Remedy
The Remote Commander does not work.
Check that the batteries are installed correctly.
Check that the batteries are not exhausted.
Check if the “ID Mode” of the projector corresponds to that of the Remote
Commander (page 7, 30).
Check the setting for “IR Receiver” (page 30).
Symptom
Remedy
The fan is noisy.
The sound from the fan is often greater than normal to cool the light source
in the following cases (page 25, 34).
When “Light Output Mode” is set to “Standard.”
When “Location” in “Intelligent Setting” is set to “Entertainment.”
The projector is in at high altitude (“High Altitude Mode” is set to “On”)
Temperature is very high.
Check that the air filter is clogged, then clean or replace it (page 51).
Check that the ventilation holes (intake/exhaust) are not blocked by a wall
or an object and secure a sufficient gap (page 4).
The network is not available.
The router may not be appropriately set. For details on the settings, refer to
the operating instructions or Website of the router, or consult a relevant
manufacturer.
Check the LAN cable connection. Unplug the AC power cord and wait for a
while, then plug the AC power cord into a wall outlet and turn on the
projector by using the
(On) key on the control panel.
Symptom
Remedy
Summary of Contents for VPL-FHZ101L
Page 64: ...Sony Corporation ...
