background image

45

The HTML content should be less than 512 MB. HTML 
content larger than 512 MB may not be displayed 
appropriately.

Some types of content or the network environment may 
affect the connection quality such. For example, loading 
may take a longer time.

The “Auto Power Saving” function is not enabled while 
using the HTML viewer (page 31).

The HTML viewer does not have an interface to work on 
the content, such as selecting a button or link displayed 
on the content. You cannot close the window, warning 
dialog, or authentication message on the content.

 

 

Scrolling a window on the HTML viewer is not available. 
Set the content size in advance to fit in the window of the 
projector.

Browser extensions, such as plug-in cannot be installed 
on the projector.

The content cannot be displayed if it is encrypted by 
protocol such as SSL or TSL.

Setting the time (for the HTML viewer)

You can set the date and time for the HTML viewer.
Use the date and time set in advance for INPUT G 
(HTML viewer).
You can set the time in [Manual (Local)] or [NTP 
Server].

Current Date Time:

 Display the current date 

and time by local time.

Setting:

 Enter the following items to set the 

date and time. 

-Timezone:

 Set the time zone. Summer time is 

unavailable.

-Use NTP server:

 Select when obtaining the 

time via a network (NTP server).

-NTP Server:

 Enter the NTP server.

-Status:

 Display the connection status to the 

NTP server.

-latest server data:

 Display the information 

last obtained from the NTP server.

Manual(Local):

 Select when setting the date 

and time manually.

Date(yyyy-mm-dd):

 Enter the date.

Time(hh:mm:ss):

 Enter the time.

.

You can update the software of the projector via 
the network.
The update files can be downloaded from the 
following Sony website. For details, see “Updating 
the Software” (page 52).

You can update the software via a network when Power 
status is in STANDBY.

1

Click on [SW Update] to display the SW Update 
page.

System Info.: 

Check the software version.

Power status:

 Check the power source status 

of the projector.

Select File:

 Select the file to be updated.

Date & Time button

Using the Software Update Function

Note

SW Update button

Summary of Contents for VPL-FHZ101L

































































Reviews: