43
6
Click on [PJ Control API] to display the PJ
Control API page.
Start PJ Control API Service:
Set PJ Control
API to enabled or disabled.
-Requires Authentication:
Set the
authentication for PJ Control API to enabled
or disabled.
-PSK(Pre-Shared Key):
Input the PSK
(Pre-Shared Key) for authentication. Only 8
to 63 alphanumeric characters can be
input.
7
Click on [Service] to display the Service page.
The system service function is set.
Start DDDP Service:
Set DDDP to enabled or
disabled. For details, refer to the DDDP
specifications from AMX Corporation.
Crestron Control:
Set Crestron Control to
enabled or disabled. For details, refer to the
product catalogues, etc., from Crestron
Corporation.
-IP Address:
Input the Crestron system server.
-IP ID(HEX):
Input the IP ID(HEX) for the CIP
protocol.
-Port No.:
Input the port number for the CIP
protocol server.
Resetting the network settings
Reset the network settings to their factory
defaults.
Reset:
Reset all Web browser settings to their
factory defaults.
.
You can set the HTML viewer (INPUT G) as the
background when no signal is input to the
projector or the projector is not operated.
Select “Input-G” in “Background” of the Function
menu when using the HTML viewer.
When no signal is detected, the input source
automatically switches to INPUT G. When an input
signal is detected, it switches from INPUT G to the
previous input signal.
Recommended format for still images
(For <img> tag)
The HTML viewer function is displayed by INPUT G.
Switch to INPUT G using the input key on the
Remote Commander.
PJ Control API button
Service button
About the HTML Viewer Function
Format
Resolution
JPEG
Up to 1920×1080
PNG
BMP
GIF
Reset button
Reset
Summary of Contents for VPL-FHZ101
Page 64: ...Sony Corporation ...