Sony VPL-CWZ10, Help Manual

Page: 62 / 184

Help Guide
Data Projector
VPL-CWZ10/CXZ10
Menu Operation: Adjust Signal
Adjust the projected image for computer signal input. Adjust when the edges of the screen are cut off or the image
quality is poor.
Settings
[APA]
Pressing the ENTER key will automatically modify the screen into its optimal state. This item can be selected when a
computer input signal is supplied from the RGB input terminal (Input A).
[Phase]
Adjust the input signal and display the pixel phase. Set it to the value that produces the clearest image. This item can be
selected when a computer input signal is supplied from the RGB input terminal (Input A).
[Pitch]
Increasing the value will make the horizontal width (pitch) of the display pixels become larger, and decreasing it will
make the width become smaller. This item can be selected when a computer input signal is supplied from the RGB input
terminal (Input A).
[Shift]
[H]: Increasing the value will make the screen move to the right, and decreasing the value will make it move to the
left.
[V]: Increasing the value will make the screen move up, and decreasing the value will make it move down.
This item can be selected when a computer input signal is supplied from input terminal RGB/Y PB PR (Input A).
Note
[APA] may not be able to function properly when there is a large black area around the projected image, and part of the image
may not be displayed. In addition, depending on the input, the image may not be optimized. If this occurs, configure [Phase],
[Pitch], and [Shift] manually.
The value adjusted for [Pitch] will return to its factory setting if [APA] or [Smart APA] in the [Function] menu is performed. If
you wish to continue using the adjusted value, set [Smart APA] in the [Function] menu to [Off].
Related Topic
Menu Operation: Smart APA
5-014-280-13(1) Copyright 2020 Sony Corporation
Press the MENU key.
1
Select [Screen] - [Adjust Signal] - The desired setting.
2
62