Other standby state
State in which no signal is set (light off).
WARNING: Off, ON/STANDBY: Flashes in orange
Updating software
The projector software is being updated.
Warning Indication and Remedies
WARNING: Flashes in red, ON/STANDBY: Lights in red
Number of flashes: Twice
The top cover is not properly attached.
Check the attachment of the top cover. If it has been loosened due to a strong impact to the projector, consult with
qualified Sony personnel.
Number of flashes: Three times
The light source does not light properly.
Unplug the AC power cord and make sure the ON/STANDBY indicator turns off, then plug the AC power cord into the
wall outlet and turn on the projector.
WARNING: Flashes in red, ON/STANDBY: Flashes in red
Both indicators flash
Number of flashes: Twice
The temperature in the projector is abnormal.
Check if the air filter is clogged, then clean or replace it.
Check if the ventilation holes (intake/exhaust) are not blocked by the wall or an object and secure a sufficient gap.
Check the ambient temperature and use the projector within the range of operating temperature.
Note
If the indicators flash in a manner other than described above, unplug the AC power cord and make sure the ON/STANDBY
indicator turns off, then plug the AC power cord into the wall outlet and turn on the projector. If the problem still persists, consult
with qualified Sony personnel.
Related Topic
152
Summary of Contents for VPL-CWZ10
Page 34: ...5 014 280 13 1 Copyright 2020 Sony Corporation 34 ...
Page 57: ...Related Topic Aspect Ratio 5 014 280 13 1 Copyright 2020 Sony Corporation 57 ...
Page 108: ...Related Topic Updating Software 5 014 280 13 1 Copyright 2020 Sony Corporation 108 ...
Page 153: ...5 014 280 13 1 Copyright 2020 Sony Corporation 153 ...
