Sony VPL-CWZ10, Help Manual

Page: 111 / 184

Help Guide
Data Projector
VPL-CWZ10/CXZ10
Connecting with https for the First Time
If the https function works improperly when connecting only with https by setting [Communication Mode] to [Https], the
computer cannot access the projector. To avoid this, confirm if the https connection is possible through the following
steps.
If the setting window or web browser is closed due to https connection failure during confirmation, http connection is still
possible as [Http and Https] is selected. Confirm the certificate setting with the http connection, and then confirm if the
https connection becomes possible again.
Note
When [Https] is selected in [Communication Mode] on the [Certificate] page, the computer cannot access the projector if the https
connection fails. In this case, press the MENU button on the projector or Remote Commander to display the menu screen, and
then select [Connection/Power] - [Communication Mode] - [http] to change the communication mode.
Related Topic
Configuring https Communication
5-014-280-13(1) Copyright 2020 Sony Corporation
Click [Certificate] and display the [Certificate] page.
1
Set [Communication Mode] to [Http and Https].
2
Install a certificate.
For installing a certificate, please refer to “Set a certificate” in “ Configuring https Communication .”
3
Close the web browser.
4
Start the web browser to display the projector setting window with https connection.
For the connection method, please refer to “When Using the https Function” in “ Configuring https Communication .”
5
Confirm that the https connection is possible, and then set [Communication Mode] to [Https].
6
111