background image

 

  VPCSB Series Hard Disk Drive 

 

            Replacement Instructions 

 

FOR TECHNICAL SUPPORT IN THE US CALL TOLL FREE 1-866-651-7669 FROM 9:00 AM TO 11:00 PM EST 

P/N  

989202617

 

Rev. B

 

4/4

   

 

 

 

 

Step  3. 

Using  two  fingers,  reinstall  the 

HDD  Cable  to  the  unit  by  aligning  the 
connectors, and then push straight down 
to seat. 

 

 

 

 
 

 

Battery Reinstallation

 

Step  1. 

Reinstall  the  Battery  into  the 

Battery Bay. 

 

 

 

 

 
 
Step 

2. 

Re-attach 

the 

Hard 

Drive/Battery  Door  by  sliding  up 
towards  the  unit.  Verify  the  Door  sits 
completely flush. 

 

Step 3.

 Re-install the two (2) Hard Drive 

Door screws to secure the Door.  

 

 
 

Step 4

. Reconnect the AC Adaptor. 

 
Power  on  your  computer  and  continue 
with  the  recovery  process  by  following 
the instructions described on the back of 
the recovery disk’s case. 

 

Return the old Hard Drive to 

Sony using the included 

shipping instructions. 

 

  
 
 

 

 

Summary of Contents for VPCSB Series

Page 1: ... screwdriver remove the two 2 screws securing the Hard Drive Battery Door Put the screws aside to re secure the Door later in the procedure These easy instructions will guide you through the Hard Drive replacement process Before you begin place your notebook computer on a clean or covered surface to avoid damage to the computer s case Follow the ESD Electrostatic Discharge damage prevention instru...

Page 2: ...ft up to remove HDD Removal Step 1 Using two fingers lift the HDD Cable straight up to disconnect from the unit Step 2 Using the enclosed magnetic screwdriver remove the four 4 screws securing the HDD Assembly Put the screws aside to re secure the HDD later in the procedure Step 3 Grasp the Right side of the HDD and carefully lift from the unit to remove HDD Disassembly Step 1 Using two fingers sl...

Page 3: ...tion as the old Hard Drive so that it aligns with the Brackets as shown Step 2 Re install the four 4 Hard Drive Bracket screws to secure the Brackets to the New Hard Drive Step 2 Re install the four 4 Hard Drive screws holding the Hard Drive assembly in place Step 3 Re install the HDD Cable to the Hard Drive by aligning the connectors Note The wide end of the Cable attaches to the Hard Drive at th...

Page 4: ...ry Reinstallation Step 1 Reinstall the Battery into the Battery Bay Step 2 Re attach the Hard Drive Battery Door by sliding up towards the unit Verify the Door sits completely flush Step 3 Re install the two 2 Hard Drive Door screws to secure the Door Step 4 Reconnect the AC Adaptor Power on your computer and continue with the recovery process by following the instructions described on the back of...

Reviews: