19
Advanced Operation
Adjusting the image to your taste
The VID-P150 automatically adjusts the focus, iris and
white balance when you turn on the power and set the
material to be displayed in the middle of the screen.
You can also adjust them yourself manually as you
wish.
Presetting the pattern memory
(PATTERN MEMORY buttons)
The PATTERN MEMORY buttons on the operation
panel or on the remote commander allow you to preset
four pattern settings, two for document position and
two for flip-up position. The pattern memory function
memorizes the camera angle, zoom, focus, iris, white
balance, lighting and effect (black & white, negative)
settings. Once you have preset the pattern memory for
an object you use often, you can recall the pattern
memory by pressing the button you preset.
1
Adjust the camera angle, zoom, focus, iris, white
balance, lighting and effect (black & white,
negative) settings.
2
Press the PATTERN MEMORY SET button.
3
Press the PATTERN MEMORY 1 or 2 button
while the PATTERN MEMORY SET indicator is
flashing fast (for about 5 seconds).
The PATTERN MEMORY SET indicator lights
for about 2 seconds and then turns off. When
using the remote commander, a beep sounds.
When the setting has not been properly memorized
If the PATTERN MEMORY SET indicator does not
light for about 2 seconds, or a beep does not sound
when using the remote commander, the setting may
not have been properly memorized. In this case, repeat
steps
1
to
3
.
To recall the setting you preset
To recall the document position setting, set the camera
manually to document position, to recall the flip-up
position setting, set the camera manually to flip-up
position, then press the PATTERN MEMORY 1 or 2
button.
Notes
• If you set the PATTERN MEMORY setting when the
camera is in the flip-up position and the camera angle
is out of the automatic operation range, the camera
angle is set to the widest angle possible in the
automatic operation range (100
°
) (page 17).
• When you recall the pattern memory setting, the
position may not be exactly the same as it was set.
Adjust the camera angle if necessary.
• When you turn on the power, or the pattern memory
has not been set, the PATTERN MEMORY 1 or 2 is
the factory setting except the home position setting.
•The setting you preset will be reset when you turn off
the power.
T
W
1
2
SET
PATTERN MEMORY
PATTERN
MEMORY
buttons
