10
Remote control range
The remote control range is 5m (15
1
/
3
ft) at 30 degrees
either side in the direction of the white arrow on the
top of the remote sensor. The remote sensor can be
adjusted 150 degrees to either side as viewed from the
front of this unit.
Note
Be sure that there is no obstacle between the remote
sensor and the remote commander.
Remote Commander
Parts Identification
PATTERN MEMORY buttons (page 19)
REMOTE COMMANDER number switch
(page 22)
HOME button (page 17,20)
ZOOM buttons (page 17)
CAMERA ANGLE buttons (page 16)
1
HOME
SET
PATTERN
MEMORY
CAMERA ANGLE
1
2
T
W
2
150°
150°
5m (15
1
/
3
ft)
30°
30°
Checking the remote control
When the remote commander does not work, check
the following:
• BIT switch settings on the rear panel are wrong
(page 22).
– REMOTE CONTROL is OFF.
n
Set to ON.
– REMOTE COMMANDER number is wrong.
n
Set the number correctly.
• Batteries are weak.
n
Replace both batteries.
• The remote sensor and the remote commander do
not face each other.
n
Adjust the direction.
