66
Loading Media Note:
It will take about 30 seconds for Media Center to scan each disc. It is
recommended to insert each disc into the changer, and then let them all scan one after the other. For
additional information, go to the
Manage Discs
topic in
My Changer
.
Loading Media Changer
Unloading Media Changer
1
Make sure the Changer/Recorder is
properly connected to the Personal
Computer and is turned on.
Note
: When loading discs, make
sure that the label is facing to the
right of the slot.
2
To load a
single
disc, press the
Load
button once and insert the disc
in the slot. To load
multiple
discs,
press the
Load
button twice and
insert each disc in the slot one at a
time. The drive will be blocked until
the system is ready for the next disc.
3
Once the discs have been inserted,
they must be scanned by Media
Center before they can be viewed.
Go to
More Programs
and select
Manage Discs
or to
My DVDs
4
Click
Yes
on the
NEW DISCS
FOUND
message to update your
library with the new disc(s)
information.
To eject discs using Media Center
:
1
From Media Center, go to
My
Changer
and select
Manage Discs
.
2
Select the
Eject
button associated
with the disc you want to eject.
To eject discs manually
:
1
Press the
Eject
button one time to
eject the last inserted disc.
or
2
Press the
Eject
button two times to
eject all discs in the changer slots.
This will
not
eject the engaged disc
in the changer drive. You must go to
Media Center to eject the last disc.
See steps 1 through 2 of
To eject
discs using Media Center
.
