Sony VGN-TZ31MN/N User Manual Download

Page: 93 / 218

Using Peripheral Devices

Selecting Display Modes

You can select which display to be used as the primary monitor when an external display (desktop monitor, etc.) is connected
to your computer.

If you want to work on your computer screen and the external display at the same time, see

Using the Multiple Monitors

Function

(page 94)

for more information.

To select a display

The monitor (VGA) port on your computer is not accessible when the computer is attached to the docking station.

Right-click on the desktop and select

Personalize

Click

Display Settings

The

Display Settings

window appears.

Follow the on-screen instructions to change the settings.

✍

You may not be able to display the same contents on your computer screen and the external display or projector at the same time, depending on the
type of your external display or projector.

Before turning on your computer, turn on the external display.

Summary of Contents for VGN-TZ31MN/N



























































































































































































































Search results

Summary of Contents for VGN-TZ31MN/N

Reviews:

Related manuals for VGN-TZ31MN/N

Brands by name

Popular brands

Sony VGN-TZ31MN/N, User Manual

Search results

Summary of Contents for VGN-TZ31MN/N

Reviews:

Related manuals for VGN-TZ31MN/N

Brands by name

Popular brands