Sony VGN-TZ31MN/N User Manual Download

Page: 81 / 218

Using Peripheral Devices

Attaching Your Computer to the Docking Station

Be sure to install the battery pack before attaching your computer to the docking station.

To attach your computer to the docking station

Use the AC adapter supplied with your computer.

Do not move your computer while attached to the docking station; this may detach the docking station and cause damage to both units.

Disconnect all peripherals from the computer.

Plug one end of the power cord (1) into the AC adapter (2) and the other end into an AC outlet.

Plug the cable connected to the AC adapter (2) into the

DC IN

port (3) on the docking station (4).

Summary of Contents for VGN-TZ31MN/N



























































































































































































































Search results

Summary of Contents for VGN-TZ31MN/N

Reviews:

Related manuals for VGN-TZ31MN/N

Brands by name

Popular brands

Sony VGN-TZ31MN/N, User Manual

Search results

Summary of Contents for VGN-TZ31MN/N

Reviews:

Related manuals for VGN-TZ31MN/N

Brands by name

Popular brands