Sony VGN-CR42S/B User Manual Download

Page: 50 / 192

Using Your VAIO Computer

Inserting an ExpressCard Module

Your computer is delivered with a slot protector in the ExpressCard slot. Remove the slot protector before you use the slot.

Use care when inserting or removing the ExpressCard module from the slot. Do not force it in or out of the slot.

✍

You do not need to shut down your computer before inserting or removing the ExpressCard module.

To insert an ExpressCard module

Push the ExpressCard slot protector to pop it out.

Gently take hold of the ExpressCard slot protector and pull it out of the slot.

Hold the ExpressCard module with the arrow facing upward and pointing toward the ExpressCard slot.

Carefully slide the ExpressCard module into the slot until it clicks into place.
Do not force it into the slot.

Summary of Contents for VGN-CR42S/B

































































































































































































Search results

Summary of Contents for VGN-CR42S/B

Reviews:

Related manuals for VGN-CR42S/B

Brands by name

Popular brands

Sony VGN-CR42S/B, User Manual

Search results

Summary of Contents for VGN-CR42S/B

Reviews:

Related manuals for VGN-CR42S/B

Brands by name

Popular brands