Sony VGC-RA830G, Quick Start Manual

Page: 45 / 84

Connecting the Wireless Mouse
45
Connecting the Wireless Mouse
Your VAIO® computer is supplied with a wireless mouse. Before attempting to
use the wireless mouse, you must enable communication between the computer
and the mouse. To connect your wireless mouse, it must be within 11 inches of
the computer.
1 Press the CONNECT button, located on the bottom of the infrared receiver.
2 Turn the wireless mouse over and slide the power button to the ON position.
3 Press the CONNECT button on the bottom of the mouse.
Additional information about using a wireless mouse
A wireless mouse requires unobstructed communication with the infrared
receiver for proper operation.
❑
To maintain good communication, operate your wireless mouse within 2 feet
of the VAIO® computer.
❑ Confirm that the supplied AA batteries are properly installed.
❑ Press the CONNECT button located on the bottom of the infrared receiver
first, and then press the Connect button on the bottom of the mouse.
❑ Verify the infrared receiver is free of obstructions that may prevent proper
operation.
❑
Avoid using radio-controlled toys or equipment, CB radios, and other
wireless devices in the area near your wireless mouse. These devices may
cause interference, causing your mouse to stop working properly.
✍
When attempting to connect the wireless mouse, confirm that the AA batteries
(supplied) are properly inserted into the mouse before your computer is turned on.
Connecting the mouse
Power switch
Connect button