Sony VAIO VGN-TT230N User Manual Download

Page: 83 / 228

Using Peripheral Devices

Attaching Your Computer to the Docking Station

Be sure to install the battery pack before attaching your computer to the docking station.

To attach your computer to the docking station

Use the AC adapter supplied with your computer.

Do not move your computer while it is attached to the docking station. This may detach the docking station and cause damage to both units.

The monitor port on your computer is not accessible when the computer is attached to the docking station. Use the

DVI-D

MONITOR

port on the

docking station for connecting an external display.

Disconnect all peripherals from the computer.

Plug one end of the power cord (1) into the AC adapter (2) and the other end into an AC outlet.

Plug the cable connected to the AC adapter (2) into the

DC IN

port (3) on the docking station (4).

Summary of Contents for VAIO VGN-TT230N





































































































































































































































Search results

Summary of Contents for VAIO VGN-TT230N

Reviews:

Related manuals for VAIO VGN-TT230N

Brands by name

Popular brands

Sony VAIO VGN-TT230N, User Manual

Search results

Summary of Contents for VAIO VGN-TT230N

Reviews:

Related manuals for VAIO VGN-TT230N

Brands by name

Popular brands