Sony VAIO VGN-SZ2M User Manual Download Page 95

Page: 95 / 218

Using Peripheral Devices

Connecting a Universal Serial Bus (USB) Device

To prevent your computer and/or USB devices from damage, observe the following:

❑

When moving the computer with USB devices connected, avoid any shock or force to the USB ports.

❑

Do not put the computer into a bag or carrying case when it has USB devices connected.

Connecting a USB Mouse

To connect a USB mouse

Choose the USB port (1)

you prefer to use.

Plug the USB mouse cable (2) into the USB port.
You can now use your USB mouse (3).

✍

The VAIO USB mouse software driver is preinstalled on the computer. As a result, you only need to plug the USB mouse into the USB port and you can
start working.

Summary of Contents for VAIO VGN-SZ2M



























































































































































































































Search results

Summary of Contents for VAIO VGN-SZ2M

Reviews:

Related manuals for VAIO VGN-SZ2M

Brands by name

Popular brands

Sony VAIO VGN-SZ2M, User Manual

Search results

Summary of Contents for VAIO VGN-SZ2M

Reviews:

Related manuals for VAIO VGN-SZ2M

Brands by name

Popular brands