manualshive.com logo in svg

Sony VAIO VGN-SZ2M, User Manual

The Sony VAIO VGN-SZ2M is a high-performance laptop designed for productivity and portability. Discover the full potential of this device with the comprehensive User Manual, available for free download on our website. Learn about its features, setup process, and advanced functions, ensuring an optimized and seamless user experience.

Share
Download
background image

193

n

N

Troubleshooting

Can I use a device with Bluetooth technology on airplanes?

With Bluetooth technology, your computer transmits a radio frequency of 2.4 GHz. Sensitive locations, such as hospitals and 
airplanes, may have restrictions on the use of Bluetooth devices, due to radio interference. Check with facility staff to see if 
use of the Bluetooth feature on the computer is permitted.

 

Why can't I connect to a Bluetooth device by specifying its IP address on a Personal Area 
Network (PAN)?

The Bluetooth utility software uses Dynamic Host Configuration Protocol (DHCP) to assign IP addresses to active wireless 
devices. If you specify a fixed IP address for the device to which you want to connect, the utility cannot assign a dynamic IP 
address to the device and fails. Do not specify IP addresses when using a PAN.

 

Why can't I use the Bluetooth functionality when I log on to my computer as a limited user?

The Bluetooth functionality may not be available to users with limited rights on your computer. Log on to the computer as a 
user with administrator rights.

 

Why can't I connect to a Bluetooth device in Personal Area Network User mode?

If the device to which you want to connect supports Bluetooth communication in Personal Area Network User mode only, you 
cannot establish a connection from your computer.

 

Why can't I use the Bluetooth utility software when I switch a user?

If you switch a user without logging off from your system, the Bluetooth utility software will not work successfully. Make sure 
to log off before switching a user. To log off from your system, click Start and then Log Off.

  

Summary of Contents for VAIO VGN-SZ2M



























































































































































































































Reviews:

No comments

Related manuals for VAIO VGN-SZ2M

IBM ThinkPad 380 Hardware Maintenance Manual preview
ThinkPad 380
Brand: IBM Pages: 717
NCR Decision Mate V Hardware System Technical Manual preview
Decision Mate V
Brand: NCR Pages: 426
Baaske Medical Docpad 10c W User Manual preview
Docpad 10c W
Brand: Baaske Medical Pages: 40
Avalue Technology BMX-T522-SK Quick Reference Manual preview
BMX-T522-SK
Brand: Avalue Technology Pages: 15
UCOM PRO-MIC Instructions For Assembly And Connection preview
PRO-MIC
Brand: UCOM Pages: 3
J.Burrows TORO WORKSTATION JBTORO15WS Assembly Instructions Manual preview
TORO WORKSTATION JBTORO15WS
Brand: J.Burrows Pages: 8
Cartft CALUCORE-M Assemly Tutorial preview
CALUCORE-M
Brand: Cartft Pages: 10
INTERACT AS-1004 Owner'S Manual preview
AS-1004
Brand: INTERACT Pages: 15
Sun Microsystems Sun-1 Reference Manual preview
Sun-1
Brand: Sun Microsystems Pages: 92
Sony PCG-VX88 VAIO User Guide (primary manual) Specifications preview
PCG-VX88 VAIO User Guide (primary manual)
Brand: Sony Pages: 1
Sony PCG-V505DC2K Specifications preview
PCG-V505DC2K
Brand: Sony Pages: 2
Sony PCG-V505DC2K Service Manual preview
PCG-V505DC2K
Brand: Sony Pages: 14
Sony PCG-SRX77 Specifications preview
PCG-SRX77
Brand: Sony Pages: 1
Sony PCG-K47 - VAIO - Mobile Pentium 4 3.2 GHz Specifications preview
PCG-K47 - VAIO - Mobile Pentium 4 3.2 GHz
Brand: Sony Pages: 1
Sony PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz Specifications preview
PCG-K45 - VAIO - Mobile Pentium 4 3.2 GHz
Brand: Sony Pages: 1
Sony PCG-K27 - VAIO - Mobile Pentium 4 3.06 GHz Specifications preview
PCG-K27 - VAIO - Mobile Pentium 4 3.06 GHz
Brand: Sony Pages: 1
Sony PCG-K25 - VAIO - Mobile Pentium 4 2.8 GHz Specifications preview
PCG-K25 - VAIO - Mobile Pentium 4 2.8 GHz
Brand: Sony Pages: 1
Sony PCG-K23 - VAIO - Mobile Pentium 4 2.8 GHz Specifications preview
PCG-K23 - VAIO - Mobile Pentium 4 2.8 GHz
Brand: Sony Pages: 1

Brands by name

Popular brands

Load more brands