Sony Vaio PCWA-C700 Operating Instructions Manual Download Page 9

Page: 9 / 80

System requirements

To use the supplied software, the following system requirements must be
met:

❑

Windows PC:

– 128 MB RAM or more

– Card Bus compliant PC Card slot

– CD-ROM drive (for software installation)

❑

Operating system:

– Microsoft

Windows

Millennium Edition

– Microsoft

Windows

2000 Professional

– Microsoft

Windows

XP Home Edition

– Microsoft

Windows

XP Professional

❑

Display:

High color (16 bit color) or higher, 800

400 pixels or higher

Notes

• Correct operation is not assured for all computers, even if satisfying the above system

requirements.

• Correct operation in an OS upgrade environment is not assured, except for factory

provided Windows XP upgrade packages for Sony VAIO series computers.

• For Internet access via the wireless LAN, a 802.11a/b Wireless LAN Access Point

(available separately) is required.

• An Internet Service Provider (ISP) is required for Internet access.

Summary of Contents for Vaio PCWA-C700

















































































Search results

Summary of Contents for Vaio PCWA-C700

Reviews:

Related manuals for Vaio PCWA-C700

Brands by name

Popular brands

Sony Vaio PCWA-C700, Operating Instructions Manual

Search results

Summary of Contents for Vaio PCWA-C700

Reviews:

Related manuals for Vaio PCWA-C700

Brands by name

Popular brands