Sony VAIO PCG-R600HEK User Manual Download

Page: 75 / 100

Sony Not

book Us

Getting help

About the display

My LCD does not display anything

Check that the computer is plugged into a power source and that it is turned on.

Check that the power indicator on the front panel of the computer is on.

Check that the battery packs are inserted properly and that they are charged.

Adjust the brightness of the LCD.

The display mode may be set to external display mode. Press and hold the

key while pressing

several times.

The screen image on my external display is not centered or sized properly

Use the controls on your external display to adjust the image.

The window I have just closed continues to appear on my LCD

Press the Windows

key and D key twice to refresh the screen.

About CD-ROMs and diskettes

My CD-ROM drive tray does not open

Make sure the computer is turned on.

Press the

Eject

button on the optical device drive.

If the

Eject

button does not work, you can open the tray by inserting a sharp, pointed object into the

hole to the right of the

Eject

button.

Summary of Contents for VAIO PCG-R600HEK





































































































Search results

Summary of Contents for VAIO PCG-R600HEK

Reviews:

Related manuals for VAIO PCG-R600HEK

Brands by name

Popular brands

Sony VAIO PCG-R600HEK, User Manual

Search results

Summary of Contents for VAIO PCG-R600HEK

Reviews:

Related manuals for VAIO PCG-R600HEK

Brands by name

Popular brands